Gold Member Since 2015
LEEDS INTERNATIONAL DEVELOPMENT CO., LIMITED

Polystyrene Panel, Rock Wool Panel, Sandwich Panel manufacturer / supplier in China, offering Sandwich Style Wall Panel Polystyrene or Rock Wool, Ramp Inside Car Paint Booth, Portable Car Lift /Low Scissor Lift and so on.

(/ )

Supplier Homepage Product spray booth spare parts and components Sandwich Style Wall Panel Polystyrene or Rock Wool

Sandwich Style Wall Panel Polystyrene or Rock Wool

FOB Price: US $15-20 / Square Meter
Min. Order: 1 Square Meter
Min. Order FOB Price
1 Square Meter US $15-20/ Square Meter
Get Latest Price
Port: Huangpu, China
Production Capacity: 50000m/Month
Payment Terms: T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: 50mm, 75mm
  • Fire Rating: 3
  • Customized: Customized
  • Transport Package: Standard Export Package
  • Origin: Guangzhou of China
  • Feature: Environmental, Fireproof, Metal Panel
  • Certification: CCC, ISO9001
  • Trademark: Leeds
  • Specification: EPS, rock wool
  • HS Code: 8419899090
Product Description
Spray booth routine maintenance and service
Maintenance and repair
    Keep the booth and keep the intake and exhaust duct be openChange he top filter after painting 200sets of auto or use more than one year ,But in the more dust situation ,that should be shorten the filter changed period according to the actual condition.Change the Pre-filter after painting 200sets of auto or use more than one year .Change the floor filter after painting 200sets of auto or use more than one year .Clean the filter oil cup and fire nozzle of the burner each week ,keep the oil route be through.Add the diesel oil is forbidden when the burner is working .Make sure there are more than 5L oil in the oil tank ,use Non diesel oil is forbidden.Check the filter net of the active carbon environmental cabinet after painting 20sets of auto or use more than 1month .If the painting adhibit to the filter net fulled ,change the filter net in time and keep the ventilation be through.Check the heat exchanger every two months ,examine whether have the bad welded pheonomena,make sure safety engouth.Clean the dust adhered to the fans and blades semiyearly.When you don't operate the booth for a long periods,cut off the general power ,and open the door for ventilation every three days,in case accumulate the moisture air inside the booth .Change the heat exchanger and all of the electric wire when using more than 8 years.
 
Malfunction and solution
MalfunctionCauseSolution
Annunciator light of burner turns on after it start 20 seconds
    lacking oil in the oil tankleakage from pipe connect pointsit is dirty for the filter of oil pipeit is dirty for the electric eye
    add oilconnecting the pipe againclean the filter nettake-down the electric controller and clean electric eye
It appeared black smoking after ignited the burner
    it is too small for the damper of burnerit is wrong of pump pressure
    adjust damper until without black smokingreadjust unitl it is correct
The pump of burner doesn't move
    pump is blockedreach the pre-set timeeach the pre-set temperature
    check and clean the pumpre-set timerre-set temperature
Fan capacity is too small of the spray booth
    air pre-filter is blockedThe damper is not open or open position not completely
    clean or change the air pre-filtercheck open position of the damper .Let it opened completely.
Increase temperature slowThe damper is not closed or close position not completelyCheck closing position of the damper and adjust closing position
Fans can't start
    fusingthermal relay in operationmotor,wires'circuit breaker
    change new fusepush button of repositionchange the motor and wires
 
 
 
 
 
Send your message to this supplier
Avatar
Miss Icy Li
Sales manager
*From:
To: Miss Icy Li
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now